Click on these links     to hear sound clips of certain part numbers.
If you click on the vehicle description it will bring up installation pictures if available, and click on the part # to bring up the instruction sheets.

4" Dual Turbo Diesel
Aluminized Exhaust Systems

Converts the exhaust to 4" right after the turbo unless noted, and at the rear of the down pipe turns to 5" single into a 5" single in/dual 4" out welded performance muffler.  Includes all 4" mandrel bent tail pipes, 4" down pipe, 5" front extension pipe(s), hangers, clamps, hardware, 5" single in/dual 4" out welded performance muffler, and instructions.  All kits fit all wheel base models (except GM Duramax) and all 2 & 4wd. 

Note:  these are our quietest performance turbo diesel exhaust systems.

Dodge applications:	Part #
1994-2002 Dodge Ram (w/o converter) 3/4 & 1 ton turbo diesel 5.9L, all wheel bases 2	4045500
2003-2004 Dodge Ram (w/o converter) 3/4 & 1 ton turbo diesel 5.9L, all wheel bases, will not fit vehicles with converter 2	4045520
2004(1/2)-2006 Dodge Ram 600 (w/ converter) 3/4 & 1 ton turbo diesel 5.9L, 160.5" wheel base only, cat-back kit	4045525
Ford applications:	Part #
1999-2003 Ford F250/F350 (w/o converter) 3/4 & 1 ton turbo diesel 7.3L, all wheel bases 2, 4           dyno results	4044555
2003-2007 Ford F250/F350 turbo diesel 6.0L w/converter, turbo-back , reuse o.e. converter  dyno results	4044575
GM applications:	Part #
2001-2004(1/2) GM Duramax 6.6L turbo diesel, crew cab models, LB7 1	4045750
2001-2007 GM Duramax 6.6L turbo diesel, crew cab long bed models only, cat-back kit	4045765
2001-2007 GM Duramax 6.6L turbo diesel, crew cab short bed models only, cat-back kit	4045760

¹ will fit converter equipped models as off-road
² these kits will fit vehicles equipped with converters, modifications necessary to reinstall converter
³ this kit fits only non-catalyst equipped models that have 3-1/2" exhaust from the factory
⁴ this kit will not fit on models with a rear sway bar

5" Single Turbo Diesel
Aluminized Exhaust Systems

¹ will fit converter equipped models as off-road
² these kits will fit vehicles equipped with converters, modifications necessary to reinstall converter
³ this kit fits only non-catalyst equipped models that have 3-1/2" exhaust from the factory

                                  




4" Single Turbo Diesel
  409 Stainless Steel Exhaust Systems

¹ 3" Downpipe
² will fit converter equipped models as off-road

³ note:  this is a particulate trap-back kit with a muffler eliminator pipe, check local laws for legality
⁴ note:  this is a particulate trap-back kit contains dual 5" 304 s/s tips that exit passenger side
⁵ this kit fits only non-catalyst equipped models that have 3-1/2" exhaust from the factory
⁶ rod hangers are included for 94-00 models, welding required, 92-93 require alternate hangers, off-road for converter equipped vehicles
⁷ fits regular cab long box, and crew and mega cab models



Welded Truck Mufflers
All mufflers are a free-flow design and fully-welded, center in/center out unless specified, with spiral louvered cores.  All mufflers contain no packing and are reversible,  except for the high temp fiber glass in the glasspack muffler which is not recommended to reverse the flow.  o/o = offset/offset, c/c = center/center configurations

note:  our highest flowing 5" muffler is the 7018-115AL (955 cfm at 7" of H2O), but this muffler and the 7014-115AL are our most aggressive sounding 5" mufflers.  The # 7088Q (768 cfm at 7" H2O) has a lower flow rate, but is quieter than the 7014-115AL and the 7018-115AL.  The 5024-114AL is our highest flowing and loudest 4" muffler, followed in order of lower flow rate and lower exhaust sound by the 7014-114SS, 7081W (603 cfm at 7" H2O), 7081Q (353 cfm at 7" H2O), and 1977.   For reference, in our testing, the well-designed O.E. factory muffler on a 2004-1/2 Dodge Ram 600 3500 w/5.9L turbo diesel engine flowed 433 cfm at 7" of H2O.

Size	Part #	Buy It Now
3-1/2"	0030135	Buy It Now
4"	0030140	Buy It Now
5"	0030150	Buy It Now

Heartthrob Exhaust Inc.
60819 U.S. Hwy. 12 West
Litchfield, MN 55355
P:  320-693-0222
F:  320-693-8964
email:  mike@heartthrobexhaust.com

Home

Exhaust Kits	Exhaust Parts	Other
Heartthrob Deep-Tone Dual Kits	Mandrel Bends	Manufacturing, Installation, & Fabrication Services
4" & 5" Diesel Kits	H, X, Y Pipes	About Us
Truck Cat-Back Dual Kits	Glass Packs & Flowpacks	New Items
Car Cat-Back Kits	Mandrel Bent Pipes	email us:  mike@heartthrobexhaust.com
Manifold Dual Kits	HPM Turbo Mufflers	email us:  jeremy@heartthrobexhaust.com
Truck Cat-Back Single Kits	Straight Tubing	Prototype Vehicles Required
Header Dual Kits & Accessories	Chrome Tips	Heartthrob Gear
	Stainless Steel Tips	Employment Opportunities
	Heartthrob Velocity Series Mufflers	WD Page
	Miscellaneous Items	Heartthrob 2007 GM Silverado Project Truck
	Adapters	Authorized Distributors
	Seam Locked Mufflers